One Vent

Posted in July 27, 2009 ¬ 9:17 amh.adminNo Comments »

One Vent
In heat mode, the heat of my new pump blows cold air much of a breather. How I can solve this problem?

1,250 square meters, one-story, slab house – 3ton mixed system, installed new in July '05 and the duct work in September of '03 – 8 outputs and 2 returns (both returns are in the same hall, one is the ground level on a wall the other is in the digital ceiling. programmable thermostat is set at 68 degrees. While in heat pump mode (no Emergency Heat) room ventilation lets in air that is hot to the touch, while the bedroom / bath blows air that is cold to the touch. The living room Ventilation is supplied by an 8 "and 9" without holes provided through the master bedroom is a 7 "and 8" duct with a 5 "arm in the master bath. The other vents in the house is comfortable to the touch (not as hot as the living room, but not as cold as the bedroom / bathroom.)

Sounds like a small gap in a section of the ducts near the room is getting cooler air from outside the duct when the fan is blowing. Ensure that all pipe sections are tight and sealed.

Let’s Play Martian Gothic 025 – One Vent to Judith