Mounting Base

Need help quick with mount base on rifle before loctite dries!?

First time mounting a scope. I was putting a warne picatinny rail base on my rem 700 long action, the base came with 4 screws. 2 were short and 2 were taller. I did i in this order, Tall in the very front, then short. Then in the back I did short and then Tall in teh very back end. Is this right? or are both the tall supposed to go in the front and short in the back or vice versa? I applied loctite about an hour ago so hopefully i can get an answer before it dries. I torqued them down to 30 inch pound, the 3rd one from the muzzle end doesn’t tighten, keeps spinning, all the other ones tightened.

Both short screws go in the front base. If you put a long screw in the front base it will extend into the slot for the locking lug on the bolt and you will not be able to open or close the bolt. The short one in the back will not tighten because it is not long enough to engage the threads in the receiver. Usually they are long enough to engage and tighten a couple of turns. If you used red loctite and it has already dried then you will need to use a propane torch to heat the screw untill the loctite breaks down. You will know when that happens because it will smoke alot and smell real bad.

KUDA Automotive Mounting Base In-Car Installation & Review (Magellan Premium Car Kit / iPhone 3GS)

MOUNT SUNAPEE CHAIR LIFT BASE & MT. STATIONS 2 RPPC Ski $11.99

American Defense Style ACOG QD Base Mount with Auto Lock $16.95

Ram Mount Small Drill Type Flat Vertical Base $162.26

~THE PLATE~ PROVIDES A MOUNTING BASE FOR ALL MAGNETIC MOUNT CB ANTENNAS ~NEW~ $2.99

WILLIAMS TM B22 one piece BROWNING 22 RIFLE scope mount base $14.95

SMC VALVE BASE MOUNT W/SCREWS S070B-6CG $29.99

Sea Bowld Side Mount Deck Hinge Base Size 7/8″ x 2″ Bolt 1/4″ 32-951-0762 – NEW $6.99

20ea D ROPE RINGS SURFACE MOUNT D RING w BASE f ENCLOSED CARGO TRAILER TIE DOWN $38.50

3.5″ Dia Magnetic Base Antenna Mount w UHF Connector $15.83

New Picatinny Metal RIS 20mm Standard Weaver Rail Mount Base with 4 of Screw $3.99

Rev-A-Shelf RAS-ML-HDCR Heavy Duty Mixer Lift – Wire-Chrome $87.95 Rev-A-Shelf RAS-ML-HDCR Heavy Duty Mixer Lift – Wire-ChromeRev-A-Shelf RAS-ML-HDCR Heavy Duty Mixer Lift – Wire-Chrome Features:; Each Unit Contains: Right and Left Lifting Arms, Hardware; Full Height Cabinet Required to Function Properly; Shelf NOT Included; Physical Specifications; Weight: (lbs) 15.00; Materials: Wire; Color/Finish: Chrome…

Rev-A-Shelf RV DM17 KIT Heavy Duty Door Mount Kit – Metal-Metallic Silver $16.95 Rev-A-Shelf RV DM17 KIT Heavy Duty Door Mount Kit – Metal-Metallic SilverRev-A-Shelf RV DM17 KIT Heavy Duty Door Mount Kit – Metal-Metallic Silver Features:; Heavy duty design allows installation on any door style. Works with all RV series waste containers and hampers; Physical Specifications; Weight: (lbs) 2.05; Materials: Metal; Color/Finish: Metallic Silver…

Rev-A-Shelf Door Mount Kit for RV Series White $16.93 These durable pullout waste containers are packaged fully assembled and carry the standard Rev-A-Shelf LIFETIME GUARANTEE…

Dune 2000 Dune 2000 is a real-time strategy game that requires gallant leadership, cunning tactics, and formidable military prowess to win the Emperor’s challenge by being the first to harvest the most spice and take control of Dune. Three houses have arrived to claim the prize: the honorable House Atreides, the insidious House Ordos, and the vicious House Harkonnen. Whichever house you choose to lead, reme…